mb star

The new Mercedes Benz diagnostic tool MB SD Connect C5 is verified working great. Here are customer feedback to Benz C5 SD Connect (not original Xentry Connect C5). 1. “Mercedes Sprinter year 2006 and 2014 works, both the diagnosis All the personal cars also works, no problem” 2. “All the trucks including euro6 also works, no problem. Bus Mercedes Tourismo euro5 year 2010-2012 test works, BUT year 2014 euro6 does NOT work, it says that the license is invalid. Both sd c4 and sd c5, we have tested both on the same cars, to be sure.” 3. SD Connect C5 this one customer has test, works good, in function it no difference with SD C4, but performance it is better. So you can buy MB SD C5 if you want buy new MUX. SD C5 use the same software as MB SD Connect C4. Mercedes Benz C5 Xentry Connect diagnostic interface, produced by French ACTIA Company and equipped with Panasonic Xentry-Tab, can test Engine / Transmission / air conditioning /SRS/ABS/ anti-theft system and OBD-...

Here are the step-by-step instructions for updating the kernel software (operating system) on your Star Diagnosis MB SD Connect C4 multiplexer. The kernel update of the SDconnect is similar to a regular software update via the Star Diagnosis system. Step 1. Check battery if needed (only if related message is shown in the display) When working on the vehicle or using an external power supply, the message “Batteries cannot be charged” may sometimes appear on the SDconnect display. Note: The batteries had better be brand new to make sure of sufficient electricity. Closing the Xentry Diagnostics/ Xentry DAS diagnostics application When accessing a vehicle in Xentry Diagnostics or Xentry DAS, the following message appears Exit the diagnostic application Xentry Diagnostics or Xentry DAS correctly to go on. Step 2. Connecting the SDconnect to the Star Diagnosis system with the green cable Step 3. SDnetControl Start SDnetControl by clicking the deskband Go to the “Connections...